I feel the Dinobot naming convention is an S name that is also one syllable. Strike rather than Strika/Striker.
It's ok....but I'm really not excited by it.Hmmm. Not 100% sold on super mode. Will have to see some better images of it.
View attachment 12086View attachment 12087
Legacy Evolution Commander Armada Optimus Prime First Look
Just in is our first look at the upcoming and highly-anticipated Legacy Evolution Commander Armada Optimus Prime! While appearing to be a brand new mold and separate from the much-discussed Takara figure we had seen years ago, Prime is nevertheless looking very impressive and accurate to his OG...news.tfw2005.com
I'll wait for better pics before deciding either way though.
That looks pretty neat! A definite improvement over the original and I might have to get one for my Optimus Prime shelf!Hmmm. Not 100% sold on super mode. Will have to see some better images of it.
View attachment 12086View attachment 12087Legacy Evolution Commander Armada Optimus Prime First Look
Just in is our first look at the upcoming and highly-anticipated Legacy Evolution Commander Armada Optimus Prime! While appearing to be a brand new mold and separate from the much-discussed Takara figure we had seen years ago, Prime is nevertheless looking very impressive and accurate to his OG...
Team leaders get to start their name with "Grim." It's the Dinobot equivalent of "Prime."
Before become team leader, Grimlock's name was Schlock.
Before become team leader, Grimlock's name was Schlock.
Tell me something, Hasbro. Why is it so hard for you to get the shoulders right on Armada Optimus's standard robot mode? You failed to get them right on the original Super Base toy, successfully got them right on the Super-Con figure, and have now replicated the failure of the Super Base figure's shoulders on this figure. Heck, even Takara's prototype that they showed off with Selects Star Convoy had correct shoulders. Why, Hasbro? Why, outside of the Super-Con toy, do you insist on making Armada Optimus perpetually lifting his shoulders above his head?Hmmm. Not 100% sold on super mode. Will have to see some better images of it.
View attachment 12086View attachment 12087Legacy Evolution Commander Armada Optimus Prime First Look
Just in is our first look at the upcoming and highly-anticipated Legacy Evolution Commander Armada Optimus Prime! While appearing to be a brand new mold and separate from the much-discussed Takara figure we had seen years ago, Prime is nevertheless looking very impressive and accurate to his OG...
Personally, as a kid, I always considered them Armada Dinobots. But I guess the reason AVP put them in RiD'01 was due to some canceled plans that 3H had for those Dinobots in the Universe comics, in which they would have been a RiD'01 Dinobot team.And yet the RiD continuity DARES to RUIN this utterly with its Walmart Dinobots:
Slapper (Dinobots) - Transformers Wiki
tfwiki.net
Terranotron (Dinobots) - Transformers Wiki
Triceradon (Dinobots) - Transformers Wiki
(as an aside, I don't get why these were assigned to the RiD continuity anyway, where there was ALREADY a bot with the terrible name of Slapper...)
But then I guess Grimlock ruins the Dinobot naming pattern anyway, on day one. Kings no listen to naming conventions, they bash brains.
It also may have been based on the fact that, during Armada but before Universe, all of the store-exclusive releases that were redecos of molds from pre-Armada toylines were sold under the RiD'01 label, except for those three Dinobot 2-packs, making them an anomaly that might have led some to consider them sort of "de facto" or "honorary" RiD'01 figures since they had all of the same characteristics as the pre-Universe, Armada-era, RiD'01 store-exclusive releases, save for having the RiD'01 label itself.
RiD Grimlock's previous name was Steelwall.
-ZacWilliam, love that bit from Academy.
I would make the why my shoulders hurt joke but I don't want to summon the Walky.Tell me something, Hasbro. Why is it so hard for you to get the shoulders right on Armada Optimus's standard robot mode? You failed to get them right on the original Super Base toy, successfully got them right on the Super-Con figure, and have now replicated the failure of the Super Base figure's shoulders on this figure. Heck, even Takara's prototype that they showed off with Selects Star Convoy had correct shoulders. Why, Hasbro? Why, outside of the Super-Con toy, do you insist on making Armada Optimus perpetually lifting his shoulders above his head?
Personally, as a kid, I always considered them Armada Dinobots. But I guess the reason AVP put them in RiD'01 was due to some canceled plans that 3H had for those Dinobots in the Universe comics, in which they would have been a RiD'01 Dinobot team.
It also may have been based on the fact that, during Armada but before Universe, all of the store-exclusive releases that were redecos of molds from pre-Armada toylines were sold under the RiD'01 label, except for those three Dinobot 2-packs, making them an anomaly that might have led some to consider them sort of "de facto" or "honorary" RiD'01 figures since they had all of the same characteristics as the pre-Universe, Armada-era, RiD'01 store-exclusive releases, save for having the RiD'01 label itself.
The shoulders still are a bit higher than I would like on the prototype too.
I didn’t like the look of all the grey around the shoulders of super mode. Just looked up how he was in the show and yup, there it was. Guess I never noticed it.
Was it really that much of a base in the original? Didn't it just unfold and have a couple minicon gunner spots?
It wasn't really anything to write home about, but given it had to be a trailer, base and a pair of pants AND incorporate an auto-transforming gimmick, it's not surprising the base mode is kinda forgettable.
Hopefully they can do something good now that they don't have to account for a bunch of motors and a bigass battery pack. The legs look worlds better at least.
Also, Hasbro released pictures of most of Volcanicus (they're using two Grimlocks for legs)
news.tfw2005.com
He actually doesn't look as bad as I thought he would. Shame that comes at the cost of kind of gumming up at least 4 of the Dinobots.
Transformers Legacy Core Dinobots & Volcanicus Official In-Hand Images & Comments
Hasbro designer Evan Brooks have just updated his Instagram account with images and comments about the new Transformers Legacy Core Dinobots & Volcanicus. "Hi Transformer fans! Playing a bit of catch up since I forgot we were revealing Core Class Swoop and Skarr so soon! These guys form the...
news.tfw2005.com
He actually doesn't look as bad as I thought he would. Shame that comes at the cost of kind of gumming up at least 4 of the Dinobots.
It does look pretty good, doesn't it? My only complaint is that the forearm that's made out of Swoop's legs is hollow in the front. I can forgive a lot of hollow back-of-limbs, but that's pretty much front and center.
Still, though, I'm 100% on board for this and the Dino King repaint.
Still, though, I'm 100% on board for this and the Dino King repaint.
Hey wait a sec! Those seem like basic sized figures. Are they the "mini" dinobots I saw at walmart the other day?
They are the new Core Class Dinobots, yeah. Only Sludge and Slag have been released so far. I love 'em.
And "Slapper" can join "Slag" for the contender of "Most Misogynistic Name For a Transformer Outside the US" award:
- https://dictionary.cambridge.org/dictionary/english/slapper
- https://www.collinsdictionary.com/dictionary/english/slag
Now all we need are some new Dinobots called "Sc*nk", "Sl*t", "Sh*g" (the verb, but it's topical), "Scr*bber" and "Str*mpet".
Honestly, I've always felt pretty "m'eh" about all that. Like, I do get that those words are offensive slang terms, but not in the country of origin of the figure. I'm not even sure if those are still popular terms over in England, or if they've become fairly old and removed from the popular culture. Someone more familiar with British English could let me know.
I more or less grew up in a metalworking shop, so Slag has never meant anything else to me but the burnt metal residue that I had to sweep off of the floor. As such, it's a great name for a fire-breathing Dinobot. When a word has multiple meanings, and the user of the word so clearly and obviously is using it in the inoffensive, actual-definition-of-the-word sense, it feels like you almost have to be trying to be offended because the word also has a more obscure but offensive slang connotation in another country.
That said, though, it doesn't bother me at all when Hasbro puts "Slug" on the package. I don't generally keep packaging anyway, so it could say Rock Strongo or Princess Ponyweather III for all I care. He'll be Slag to me.
I more or less grew up in a metalworking shop, so Slag has never meant anything else to me but the burnt metal residue that I had to sweep off of the floor. As such, it's a great name for a fire-breathing Dinobot. When a word has multiple meanings, and the user of the word so clearly and obviously is using it in the inoffensive, actual-definition-of-the-word sense, it feels like you almost have to be trying to be offended because the word also has a more obscure but offensive slang connotation in another country.
That said, though, it doesn't bother me at all when Hasbro puts "Slug" on the package. I don't generally keep packaging anyway, so it could say Rock Strongo or Princess Ponyweather III for all I care. He'll be Slag to me.