This is the way.
The Random Transformers Image Thread
- Thread starter DefaultOption
- Start date
Is that not how he's meant to go?
Heres the issue...
Computrons foot plate are center post so 3 of the Technobots have center post peg holes (Strafe Lightspeed and Afterburner)
Nonecone has peg holes that are offset left and right meaning if used as a foot then the foot plate is wonky and off
So that meens Nosecone really has to be an arm if you want a cohesive look
Strafe makes for an awful leg due to the wings so Lightspeed and Afterbuner are your only real option
And you want the vehicle bits in the front otherwise you end up looking like goofy looking robots holding up a bigger robot like the official art of Superion
Instead of how there intended to be because with the robot bits facing forward you lose the knee bend and the leg
Computrons foot plate are center post so 3 of the Technobots have center post peg holes (Strafe Lightspeed and Afterburner)
Nonecone has peg holes that are offset left and right meaning if used as a foot then the foot plate is wonky and off
So that meens Nosecone really has to be an arm if you want a cohesive look
Strafe makes for an awful leg due to the wings so Lightspeed and Afterbuner are your only real option
And you want the vehicle bits in the front otherwise you end up looking like goofy looking robots holding up a bigger robot like the official art of Superion
Instead of how there intended to be because with the robot bits facing forward you lose the knee bend and the leg
My Lightspeed was usually an arm because my Afterburner's head broke off.
This popped up on my Facebook memories. This was my Jack-o-lantern 15 years ago THIS VERY NIGHT!
